Sūtījuma sekošanas sistēma!
Tagad jūs varat ērti sekot savam sūtījumam.
27,00€
- Pieejamība: Noliktavā
- Skaits > 5
Paredzamais piegādes laiks no 06-08-2025 līdz 11-08-2025 datumam
Šī prece no noliktavas brauc uz veikalu līdz 10 darba dienām pēc apmaksas saņemšanas.
Apmaksa ar bankas karti onlainā!
Pasūtījumu pieņemšana 24 stundas dienaktī!
Mēs apstrādāsim jūsu pasūtījumu jebkurā laikā.
| Citi | |
| Accessories included | - Mounting screws- Three AA 1.5V alkaline batteries |
| Alarm | Sound; Light |
| Color | White |
| Detector | Carbon monoxide |
| Dimensions | 118 x 70 x 40 mm |
| Environment requirements | Temperature range:- 0 ° C ... + 40 ° C: work- -10 ° C ... + 60 ° C: transport and storageHumidity:- Up to 90% RH, non-condensing |
| Other features | Certificates and approvals:- PN-EN50291-1: 2010, certificate for the use of flats and houses- PN-EN50291-2: 2010, certificate for use in caravans, camper and boats technical opinion CNBOP-PIB OT-0004/2014- CE declaration |
| Power | Batteries / rechargeable AA |
| Special functions | Sensor:- KIDDE Electrochemical CO Sensor - one of the most accurate electrochemical sensors in the world- Power supply: DC, three AA 1.5V alkaline batteries (supplied)- Mounting: on the wall (mounting screws included) or as a standalone unitSIGNALING:- Exceeded CO concentration: 85 dB acoustic and optical (red LED), indication of concentration detected on LCD panel- Low power level (battery discharge): Lo message on LCD panel, short beep and red LED flashing- Incorrect operation: Err message on the LCD panel, short beep and red LED flashing or continuous alarm in the absence of displayEnd of life: End message on the LCD panel, two short beeps, and two red LED flashes within 30 seconds.Indications on LCD panel: Current CO concentration in the range of 0 - 999 PPM *- Lo - low power state (discharged batteries)- Err - device malfunction- End - End of sensor operating period- Test / Reset button: to control and operate the device. At the push of a button, the machine performs a control test and, when activated, enables it to be turned offPeak Concentration Button: When pressed, the highest detected CO level is displayed when the detector memory is cleared.Alarm activation times alarm thresholds according to PN-EN50291: 2010- 30 PPM no alarm before 120min.- 50 PPM must alert within 60-90 minutes.- 100 PPM must alert within 10-40 minutes.- 300 PPM must alert within 3 minutes |
| Volume | 85 dB |
| Weight | 160 g |